Home » Resources » Reverse Engineering in Injection Mould Manufacturing

Reverse Engineering in Injection Mould Manufacturing

With the development of computer technology, CAD technology has become an important tool for product designers to carry out R&D. Three-dimensional modeling technology has been widely used by plastic injection mould manufacturer in product and injection mould design, program review, automated processing and injection mould manufacturing, and management etc. In the actual injection mould development and injection mould manufacturing process, the technical data received by the designer may be a three-dimensional model of various data types, but in many cases, the physical model of the product is obtained from the upstream manufacturer. Designers need to transform physical information into CAD models in a certain way, which applies to reverse engineering.

The so-called reverse engineering technology refers to the process of measuring a physical object or a model by a certain measuring means, and reconstructing a physical CAD model by a three-dimensional geometric modeling method according to the measured data. Reverse engineering technology is very different from traditional forward design. Traditional product design generally requires a design process from scratch. The reverse engineering is based on the prototype of the product, and then the three-dimensional digital model of the product is obtained, so that it can be further processed by advanced technologies such as CAD/CAM/CAE. The difference in its design process is that the starting point of the design is different, and the corresponding design freedom and plastic mould design requirements are also different.
plastic parts
In general, product reverse engineering includes several aspects such as shape reversal, process reversal and material reversal etc. In the practical application of reverse engineering in the injection mould manufacturing field, it mainly includes the following items:
1. The design of new parts is mainly used for product modification or profiling.
2. Copying existing parts to reproduce the original product's design intent.
3. Restoration of damaged or worn parts.
4. The detection of digital models, such as testing the product's deformation analysis, welding quality, etc., and comparing the models.
5. Reverse engineering technology provides good technical support for rapid design and rapid prototyping. It has become one of the important and succinct ways of information transmission in manufacturing.

Welcome to ACO Mold injection moulding company and contact us. The mould engineers from ACO Mold will give you the best solution, and recommend the suitable materials for you. We are ready and looking forward to cooperate with your next project. You will be happy and satisfied to be our partner in mould making and injection moluding project.

Post a Comment:

    
Plz Calculate (1 - 3) =
(Your comment will show after approved.)

You may also like:


Online tour of our plastic injection mould making factory in Shenzhen China.
Featured Articles
How to Charge Fee When Modifying ... We all know that although product will make hand board for verification before development and it will not start the mould ...
How to Make Plastic Die Sinking ... Under the circumstance of without drawing, plastic injection moulding company can provide the product copy data service to make ...
Mould Maker, Injection Mould Making ... Mould Maker, Injection Mould Making Company Selection TipsIt is very easy to find an injection mould maker, the most simple and effective way is to participate in relevant exhibitions. ...
10 Factors Influence Injection Mould ... 10 Factors Influence Injection Mould QualitySteel is a decisive factor of mould quality, a reasonable choice of steel is the most important. Steel selection criteria are: ...
Basics of Plastic Injection Mould ... Basics of Plastic Injection Mould DesignCollect all basic technical documents from the mould design to finish processing, such as the mission statement, parts diagrams, ...